T1-AirDrive HotTapping Machine

T1-A AirDrive Turn-key Package


T1A =3/4"-4 Taps
T1-A Air Drive Hot Tapping Machine Complete Turn-Key Package

T1-A Air Drive Hot Tapping Machine

The T1-A Tapping machine consists of a 3 rail frame in which the drive unit slides and operates off a 3/4 Horsepower Cleco Air Motor, requiring 90 – 100 PSI air pressure through a minimum 3/8” I.D. hose to create a spindle speed of 225 RPM. Behind the drive motor, the feed assembly slides and locks into place. The packing housing, consisting of 3 O-rings, at the opposite end of the feed assembly, seals around different length boring bars, depending on the travel needed to complete the tap. Different size adaptors screw on to the machine which are sealed by an existing O-ring for convenient size changes.

  • Designed by Tappers for Tappers
  • Airdrive motor
  • Built-in drive unit
  • Taps all types of pipe quickly & safely
  • Machine comes standard with our newly designed 3-rail locking handles for added stability.
  • 3/4-4" pressure taps-ins
  • 3/4-4" compatable for line stopping
  • Total weight T-1 35lbs.
  • Made in the USA

    Operating max pressure 300psi@ 100°F (std.packing)
    Operating temperature 250°F @ 250psi
    (optional) High temperature kit 495 Deg. F° @ 200PSI., copper flared

Don't be fooled by cheap imitations, we are the original manufacturer of the T1 series tapping machine!

This Tapping Machine Taps:

  • Asbestos-Cement Pipe
  • Stainless Steel Pipe
  • Steel Cylinder Pipe
  • Carbon Steel Pipe
  • Ductile Iron Pipe
  • Cast Iron Pipe
  • CMLC Pipe
  • Copper Pipe
  • PVC Pipe
  • Polyethelene Pipe
  • Carbon Iron Pipe
  • Transite Pipe
  • Metal Walls
  • Concrete Walls
  • Ship Walls
  • Steel Plate

Pipeline Contents

  • Crude Oil
  • Gasoline
  • Potable Water
  • Domestic Water
  • Waste Water
  • Reclaimed Water
  • Steam
  • Natural Gas
  • Wastewater
  • Sewage
  • Chemicals
Qtn: Part:  
1 T1Airdrive tapping machine, airdrive motor, back plate w/ spacers for T1 airdrive drive motor, chuck wrench for securing boring bar, packing adaptor housing, packing assembly, O-rings for standard temperatures, feed screw assembly
$8,565.00
1 18” D-Boring bar for 3/4” – 1 1/4” taps
1 18” P-Boring bar for 1 1/2” – 2” taps
1 24” P-Boring bar for 2 1/2” – 3” taps
1 30” P-Boring bar for 3” – 4” taps
2 3/8" Spare retention pilot drill w/wire for P style boring bar
2 1/4” Spare retention pilot drill w/wire for D style boring bar
1 1” Iron Pipe sub adaptor
1 1 1/2” IP sub adaptor
1 2” IP Sub adaptor
1 2 1/2” IP sub adaptor
1 3” IP Sub adaptor
1 4” Flanged sub adaptor will bolt-up to 4” Mechanical joint valves also.
1 11/16” Bi-Metal holesaw
1 7/8” Bi-Metal holesaw
1 1 1/8” Bi-Metal holesaw
1 1 3/8” Bi-Metal holesaw
1 1 7/8” Bi-Metal holesaw
1 2 3/8” Bi-Metal holesaw
1 2 7/8” Bi-Metal holesaw
1 3 1/2” Bi-Metal holesaw
3 Retention wire for D - style drills.
3 Retention wire for P - style drills.
1 Owners manual
1 *Storage box

Total

$9,895.00 now 9,400.00 + shipping

Not necessary to purchase complete kits. Feel free to purchase only what you need for the job.
D - Boring bar allows for small cutters to screw directly on. A 1/4" retention style pilot drill is supplied with each D boring bar in this package. P– Each boring bar has a cutter mandrel and retaining pilot drill. A 3/8" retention style pilot drill is supplied with each P boring bar in this package.

*Storage box is for shipping purposes only! Not responsible for damages to the steel box during shipping!
Dual Spring Wire Catches Coupon    

T1-A AirDrive Video


This video shows a 2” hot tap completed on a 4” Ductile Iron outdoor pipeline. The T1-A made a perfect pipe tap with the coupon retained and revealed for you to see.

T1-Series Hot Tapping Machine Accessories

High Temperature Packing Assembly
High Temp Packing Assembly
High Temperature Packing Assembly
. Raises max temperature to 495 Deg. F° @ 200PSI. Compatible with 2LBin T1 Series Hot Tapping Machines
Specs
Item #
Price
High Temperature Packing Assembly
T1S-STM-450
$365.95
 
       
High Temperature Graphic Coated Gaskets
High Temp Graphic Coated Gaskets
High Temp Graphic Coated Gaskets. Two circle gaskets per order.
Specs
Item #
Price
Two circle gaskets
3125SS
$19.95
       
1/4" x 4" Pilot Drill Bits with Retainer Wires
1/4inch Pilot Drill x 4inch
(2- retainer wire holes catch coupon– Total bit length 4” - Flute length 1 1/2”)
Compatible with most Hot Tapping Machines.

Retention Wire Installation Video
Specs
Item #
Price
1/4" x 4" Pilot Drill
T1P-1402-RRW
$18.95
Wire diameter  .039 = .991 mm
       
1/4" Pilot Drill Bit Retainer Wire .039 or .991mm Thickness
3-feet of spring wire diameter .039 = .991 mm
Retention Wire Installation Video
Specs
Item #
Price
3-feet of spring wire diameter  .039 = .991 mm
T1P-.039-wire
$10.00
       
3/8" Pilot Drill Bits with Retainer Wires
3/8inch Pilot Drill x 4inch or x 5inch
(2- retainer wire holes catch coupon- Total bit length 4" or 5" Flute length 1 3/4”)
Compatible with most Hot Tapping Machines

Retention Wire Installation Video
 
Specs
Item #
Price
3/8" x 4" Pilot Drill
T1P-3840-RRW
$46.95
3/8" x 5" Pilot Drill
T1P-3850-RRW
$48.95
Wire diameter  .051 = 1.295 mm
 
       
3/8" Pilot Drill Bit Retainer Wire .051 or 1.295 mm Thickness
3-feet of spring wire diameter .051 or 1.295mm
Retention Wire Installation Video
Specs
Item #
Price
3-feet of spring wire diameter  .051 or 1.295mm
T1P-.051-wire
$12.00
 
1/4" x 4" Carbide Tipped Pilot Drill Bits with Retainer Wires
1/4 x 4inch Carbide Tipped Pilot Drill with Retainer Wires
(2- retainer wire holes catch coupon- Total bit length 4" Flute length 1 3/4”)
Compatible with most Hot Tapping Machine
Retainer wires come installed in drill bits
 
Specs
Item #
Price
1/4" x 4" Pilot Drill
T1-1404-CT
$31.00
Wire diameter  .039 = .991 mm
 
       
3/8" Pilot Drill Bits with Retainer Wires
3/8inch Pilot Drill x 4inch or x 5inch
(2- retainer wire holes catch coupon- Total bit length 4"or 5" Flute length 1 3/4”)
Compatible with most Hot Tapping Machines

Retainer wires come installed in drill bits
 
Specs
Item #
Price
3/8" x 4" Pilot Drill
T1-3804-CT
$35.00
Call and Request
1-800-279-5659
3/8" x 5" Pilot Drill
T1-3805-CT
Call
Wire diameter  .039 = .991 mm
 
 
Boring Bars
Boaring Bars
Boring bars for the T1-2, T1-M, T1-A & T1-4 hot tapping machines
 
Specs
Item #
Price
18" D- Boring Bar for
3/4" - 1 1/4" Taps
T1-BBD-1800
$215.00
18" P- Boring Bar for
1 1/2" - 2" Taps
T1-BBP-1800
$170.00
24" P- Boring Bar for
1 1/2" - 2" Taps
T1-BBP-2400
$231.00
30" P- Boring Bar for
3" - 4" Taps
T1-BBP-3000
$231.00
Style P boring bars require a mandrel set for hole saw
 
       
Solid Pilot Drill Bits
Boaring Bars Solid Drill Bits
Boring bar solid drill bits.
  Specs
Item #
Price
7/16” x 18” Solid bit with 3/8” Shank for a 1/2" Tap and requires the 3/8” Brass Packing Assembly at bottom of this page, here.
T1-7-16-SOLID
$300.00
11/16” x 18” Solid Drill 5/8” Shank for a 3/4" Tap     
T1-BBT-1800
 $432.00
7/8” x 18” Solid Drill 5/8” Shank for a 1" Tap
T1-BBT-1801
$459.00
 
If you do not have a way to drill we can offer solid bits for the packing tool in order to perform tap. These solid bits are threaded and pinned – not welded.
       
Tapping Adaptors
Tapping Adapters
Threaded national iron pipe tapping adaptor with a 1/4" IP bleed off port.
 
Specs
Item #
Price
1" Threaded
T1A-IP-100
$153.95
1 1/2" Threaded
T1A-IP-150
$153.95
2" Threaded
T1A-IP-200
$153.95
2 1/2" Threaded
T1A-IP-250
$190.00
3" Threaded
T1A-IP-300
$294.72
4" Flanged
T1A-TFL-150
$334.95
Need more sizes? Click here  
National Iron Pipe (NIP) threaded adaptor
 
       

T1-2 to T1-4 Machine Upgrade
T1-2 to T1-4 Machine Upgrade
(This parts package increases the T1-2 to a T1-4 machine)
Compatible with most T1-2 Hot Tapping Machines

Specs
Item #
Price
18" P- Boring Bar for
1 1/2" - 2" Taps
T1-BBP-1800
$170.00
30" P- Boring Bar for
3" - 4" Taps
T1-BBP-3000
$231.00
2 1/2" Threaded
T1A-IP-250
$190.00
3" Threaded
T1A-IP-300
$294.72
4" Flanged
T1A-TFL-150
$334.95
Mandrel Set x 2
T1-BBM-3000
$91.13
2 3/8” Bi-Metal Holesaw
BM-538-238
$19.32
2 7/8” Bi-Metal Holesaw
BM-546-278
$ 21.69
3 1/2” Bi-Metal Holesaw
BM-556-312
$26.64
 
Mandrel Set
Mandrels for tapping machine
(Mandrel sets are for type P Boring bars)
Compatible with most T1-2 & T1-4 Hot Tapping Machines
Specs
Item #
Price
Mandrel Set
T1-BBM-3000
$91.13
2 pins and an upper and lower mandrel set
 
Power Bracket, Set Screws and Spacers
Power Bracket and Set Screws with Spacers
(Power Bracket comes with 4 Set Screws and 4 spacers)
Compatible with most T1-2 & T1-4 Hot Tapping Machines
Specs
Item #
Price
Power Bracket, Set Screws and Spacers
T1-PB , T1-PBS & T1-PBSS
$347.68
 
       
O-ring Kit
12 O-Ring Kit
Compatible with the T1-2 & T1-4 Hot Tapping Machines
Specs
Item #
Price
O-ring Kit
T1-ORNG-P
$29.95
12 O-rings in one kit
       
T1 Packing Assembly
T1 Packing Assembly
Compatible with the T1-2 & T1-4 Hot Tapping Machines
Enables the T1 Machines to thread onto IP tapping adaptors.
 
Specs
Item #
Price
3/8” Brass Packing Assembly
T1-3-8-PACK
$155.00
5/8” Brass Packing Assembly
T1-BrassPacking
$155.00
Adapter w/Packing
T1-packing
$210.00
Adapter assembly goes inside the packing assembly
       
Iron Pipe Threaded Full Port Ball Valves
Brass Ball Valves Ball Valves Specs
The 171N Brass Ball Valves have a rugged, dependable design, meeting rigid specification for world wide use. Every valve is individually tested in an open and closed position at 80 psi. The two piece 171N full port design is available in sizes ¹⁄₄ - 4”. A wing handled version of the 171N is also available as in Figure 171N-T in sizes ³⁄₈ - 1”. All valves conform to MSS-SP-110, MSS-SP25 and Federal Specification WW-V-35B Type II, Class A
 
Specs
Item #
Price
1/4” Full Port Ball Valve
2lb-1-4-171N
$38.35
1/2” Full Port Ball Valve
2lb-1-2-171N
$42.60
3/4” Full Port Ball Valve
2lb-3-4-171N
$61.85
1” Full Port Ball Valve
2lb-1-171N
$84.60
1 1/4” Full Port Ball Valve
2lb-1-1-4-171N
$144.90
1 1/2” Full Port Ball Valve
2lb-1-1-2-171N
$196.25
2” Full Port Ball Valve
2lb-2-171N
$356.70
2 1/2” Full Port Ball Valve
2lb-2-1-2-171N
$465.70
3” Full Port Ball Valve
2lb-3-171N
$599.00

For more Full Port Ball Valves Click Here

       
Bi Metal Hole Saws
Double Stack Bi-Metal High Speed Steel Hole Saw Cutters
High-speed steel cutting edge provides shock resistant teeth and resists tooth strippage. 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration. Packaged in individual boxes.
Features:
  • 4/6 variable tooth configuration
  • 1 7/8" (48 mm) depth of cut
  • 3/16" (5 mm) thick heavy-duty backing plate eliminates need for drive plate

Application information:

  • Creates holes for pipe and tubing installations, door lock installations, electrical conduits, hoses, and antennas.
  • Ideal for plumbing, construction, aircraft, electrical, maintenance, and automotive applications.
  • Use in steel, aluminum, brass, cast iron, plastic, or wood
 
Specs
Item #
Price
7/8” Single Stack Cutter
BM-514-780
$11.82
1 1/8” Single Stack Cutter
BM-518-118
12.84
1 3/8” Single Stack Cutter
BM-522-138
13.29
1 7/8” Single Stack Cutter
BM-530-178
$16.41
2 3/8” Single Stack Cutter
BM-538-238
19.32
2 7/8” Single Stack Cutter
BM-546-278
$ 21.69
3 1/2” Single Stack Cutter
BM-556-312
$26.64
Need more sizes? Click here  
 
       
Carbide Tipped Hole Saws
Double Stack Carbide Tipped Hole Saw Cutters
Carbide tips allow for greater heat and wear resistance than bimetal tips, provide up to 10 times greater tool life on abrasive materials, and come packaged in individual boxes.
Features:
  • 3/16" (5 mm) thick heavy-duty backing plate eliminates the need for drive plate
  • 3 teeth per inch for aggressive cutting.
  • 1 5/8" (41 mm) depth of cut

Application information:

  • Ideal for plumbing, marine, and aircraft applications.
  • Use in wood laminates, fiberglass, plywood, and tile.
 
Specs
Item #
Price
7/8” Single Stack Cutter
CT-14-780
$  19.47
1 1/8” Single Stack Cutter
CT-18-118
$  24.09
1 3/8” Single Stack Cutter
CT-22-138
$  27.09
1 7/8” Single Stack Cutter
CT-30-178
$  35.53
2 3/8” Single Stack Cutter
CT-38-238
$  44.86
2 7/8” Single Stack Cutter
CT-42-278
$  50.86
3 1/2” Single Stack Cutter
CT-56-312
$  65.70
Need more sizes? Click here